Product Description
ST51 Series Insertion Mass Flow Meters
|
Mass Flow Meter Summary
The ST50 Series Flow Meters are an accurate, easy to install, no moving parts mass flow meter solution. Model ST50 is used for compressed air and nitrogen flow. Model ST51 is used for measuring biogas, digester gas, methane and natural gas. The ST50 Series utilizes FCI proven thermal dispersion technology to provide direct mass flow measurement resulting in higher performance at a lower cost than orifice plates, DP, Vortex shedding and other thermal devices. The meter installs in line sizes ranging from 2 to 24 inches [51 to 610mm] with 1/2″ or 3/4″ NPT.
The ST50 Series uses precision, lithography structured platinum RTD sensors embedded in FCI’s equal mass small diameter, all metal thermowells. Combined with microprocessor electronics and precision calibration, the ST50 achieves excellent accuracy, fast response and virtually maintenance free operation.
Model ST50 Applications |
Model ST51 Applications |
|||
Wastewater Treatment Aeration Control | Landfill Gas Recovery (LMG) | |||
Blower and Dryer Air Flow Control | Wastewater Treatment Plant Digester | |||
Burner and Furnace Air Flow Control | Coal Mine Methane Recovery | |||
Lake, Pond and Aquaculture Aeration | Livestock and Dairy Farm<br> On-Farm Biogas Recovery |
|||
HVAC Duct/Damper Control | Biogas: Biomass Fermentation and Recovery | |||
Compressed Air Distribution Measurements | Biomass Gasification | |||
Air/Compressed Air with totalized flow |
Specifications
Pipe/Line Size Compatibility: 2″ to 24″ [51 mm to 610 mm]
Flow Rate: Flow ElementInstallation: Insertion Flow TransmitterEnclosure: NEMA4X (IP67) aluminum, Epoxy coated |