Product Description
Ultrasonic flow meters SONOELIS SE806X for direct assembly in the piping
SONOELIS SE 806X – dual beam ultrasonic flow meters with the ultrasonic probes fitted directly in the piping. They measure instantaneous flow rate and total volume of the liquid passed through the sensor in fully-flooded pipes of large sizes.
The measurement principle makes possible measurement of all types of liquid media where propagation of ultrasonic signal is reasonably well provided for, including electrically non-conductive and corrosive liquids.
To ensure high measurement accuracy, theoretical calibration is performed after the meter installation in the piping.
The electronic unit of the meter can be configured in either the ECONOMIC, STANDARD or COMFORT versions, according to the customer requirements.
Technical parameters: |
|
usage | measurement of conductive or non-conductive and agressive liquids |
type | direct assembly in the piping |
number of beams | two beam (2B) |
the range of dimensions | DN200 to DN1200 |
accuracy of measurement | ±1% for v > 0.5m/sec |
temperature of measured fluid | 0°C to 150°C |
nominal pressure PN | 16, 40 |
electrical outputs | standard |
communication | RS 485 line |
power source | 230V AC ±10% |
Download |
|
Catalogue sheets | |
SONOELIS SE 804X and SONOELIS SE 806X_ENG_K (1.22 MB) | |
Manuals | |
SONOELIS SE 804X and SONOELIS SE 806X_ENG_M (2.33 MB) |