Product Description
Induction flow meters FLONET FS10XX
Induction flow meters of the type series FLONET FS10XX are intended for professional flow-rate measurements of electrically conductive fluids including abrasive particles. The meters meet most demanding requirements regarding measurement accuracy and long-term parameter stability. Flow-rate measurements in both directions are possible. The flow sensors have excellent wear resistance and its effect on the fluid flow characteristic or pressure in the connecting piping is negligible. The associated electronic unit supplies power to the sensors unit and processes the flow-rate signals. The meters have current and frequency outputs. Communication with external devices is via the Hart communication protocol. The meter display information is in English.
Technical parameters: |
|
internal diameter d | 100, 150 and 200mm (flangeless connections) 250, 300, 350, 400 and 450mm |
rated pressure PN | 10, 16 (depending on inside diameter to 150 PN16 from 200 PN10) |
min. conductivity of measured fluid | 5μS/cm |
max. temperature of measured fluid | +150°C |
electrode material | stainless steel 1.4571, Hastelloy-C4 |
sensor lining | wear-resistant material |
wearability (DIN 52108) | maximum wear loss 5cm2/50cm3 |
design version | compact or remote |
measurement accuracy | ±0.5% for flow rate 5 to 100% qs (calibrated with water) |
measurement range | 0.1 to 10m/sec |
signal outputs | current output 4 to 20mA ~ (0 to qs) frequency output 0 to 1.000Hz ~ (0 to qs) |
communication protocol | HART |
power source | 90 to 250V AC, 50 to 60Hz, 10V A, 15 to 50V DC |
ambient temperature | -40°C to +74°C |
protection class | IP67 / IP68 (sensor in remote version) |
Download |
|
Catalogue sheets | |
FLONET FS 10XX_ENG_K (774.6 kB) | |
Manuals | |
FLONET FS10XX_ENG_M (809.52 kB) |